VSGO Sensor Cleaning Swab . Full-Frame Camera

The patent cleaning swab has extremely soft head, no damage to your sensor.
The head cover is made of super fine microfiber cloth which is soft to your sensor and hard to the dirt.
The width of swab is 24mm which is compatible to Full-Frame sensors.
Each swab is packed in a vacuumed package ensure 100% dust free.

Instruction for Achieving the Best Cleaning Result:

Clean your camera at a bright and clean area.
Set camera to sensor clean mode (make sure your camera's battery is fully charged, otherwise the function is greyed out).
Remove the lens.
Use professional air blower to blast the dust from sensor.
Remove the UES full frame sensor cleaning swab form its vacuumed package and drip 1-2 drops of Cleaning Liquid on the head of the swab.
Gently drag the swab from the left of sensor to right. Turn the swap around and drag the clean side from right of sensor to the left.
Exit clean mode when cleaning finished. Turn off power and install lens. Keep camera in appropriative camera bag.

Tips:

Clean your camera on a regular basis effectively remove dust and other dirt which increases camera's useful life.
Make sure your camera's battery is fully charged before your sensor cleaning process to avoid low power reflector turn back to cause damage.
One swipe in each direction. The swabs are not reusable.
Do not use sensor cleaner in extreme temperature. It works the best in room temperature.
Keep out of reach of children. Do not eat or play with it!